Ant Bms decoding / encoding and transfer to Venus Gx, Cerbo, bbb ect to Ve.Can input. (according RecBms, BYD, LG, CAN protocol)
Add Library : FlexCAN_T4
Part list:
-teensy3.2(serial2 port: pin 9 and 10 connect to AntDisplayPort (rx/tx).
-120 Ohm 1/2w CAN bus terminator
-SN65HVD233 (teensy3.2 pin 3 and 4 (rx/tx can port))
To do list:
-transfert alarm
-set min/max temperature (retain min and max value or realtime min /max )
-transfert Ah installed, AhTotalDraw